Mettler Toledo > Canister Load Cell / Ring Load Cell > PowerCell Canister Load Cells SLC611D

PowerCell Canister Load Cells SLC611D

High-acuracy PowerCell canister load cells for heavy-capacity industrial weighing

Connectors and Cables

POWERCELL® load cells are easy to install, connecting to one another and the terminal in a simple daisy-chain network. Data transmission via CAN Bus provides a very robust digital signal not affected by cable gauge and length, damp weather, etc. No junction box is required thus eliminating a common source of error. The load cells have robust industrial cable connectors allowing the load cell or cable to be replaced independently without affecting system performance.

The product features

Capactiy range: 7.5t – 22.5t (16.5klb .. 49.5klb)
Material: stainless steel
Accuracy: OIML C3, NTEP 5000d III M.
Hazardous Approvals: ATEX, FM, IECEx
ATEX/IECEx Zone1&21 ; FM Div1 approval
IP68/IP69K Protection Class

Diagnostics

Load cell failures very often go undetected in analog systems. This cannot happen with POWERCELL. The weight information from each load cell is monitored separately by the terminal which can judge system condition and provide predictive maintenance recommendations. Load cell overload or failure, out-of-symmetry errors, or out-of-range temperature signals are recognized immediately and corrective action initiated, often allowing the scale to operate until the load cell is replaced.

CalFree Plus

Every POWERCELL® load cell is equipped with an onboard microprocessor and, as part of the manufacturing process, the load cell's calibration data is stored in its memory. When the system is hooked up, the calibration data is transferred without error to the terminal and the scale can be calibrated in seconds by CalFree Plus. In the unlikely event of a load cell failure, the calibration data for the replacement load cell is read and the the scale can be recalibrated easily.

37604494 / 33389620

info@el-batawi.com

6 El Sad El Aly Street – Dokki