The load cell, with Monobloc technology, is at the core of the SLF6-Series load cells and guarantees the highest precision and reliability.
|Maximum Capacity||6.2 kg|
|Dimensions (LxWxH)||237 mm x 180.5 mm x 87 mm|
|Repeatability (typical)||0.01 g|
|Connector||M12 connector (12 pin)|
|Housing||Stainless steel (AISI304), brushed, e-polished|
|Interface Update Rate (Max)||92 Hz|
|Operating Range (Temp.)||-20 °C – 60 °C|
|Power Supply||10 to 30 V DC|
|Preload range||1.08 kg|
|Storage temperature range||-20 °C – 70 °C|
|Tare Range||Full weighing range|
|Update Rate||92 Hz|
|Warm-up time||Typically 30 minutes|
|Zero setting range||Full weighing range|
Rated IP66/68, the load cell is sealed and can be cleaned using high-pressure water jets. This makes the load cell easy to clean and saves maintenance time.
Internal pin protects the load cell against overload forces and prevents failure due to accidents or mishandling. Product life is extended, and unplanned downtimes are minimized.
An internal adjustment weight simplifies calibration, since no external reference weight is needed for this. This may reduce the service and maintenance time required.
Reliable Weight Results
The load cell can be programmed to activate the internal adjustment automatically to handle changes in ambient temperature and ensure reliable weight readings at all times.