Mettler Toledo > Weighing Platforms and Bench Scales for Hazardous Areas > Standard Scale ICS426x

Standard Scale ICS426x

Safe - Precise - Ergonomic

Simple and Compact High-Precision Weighing

The ICS426x scales were designed for easy installation and maintenance in hazardous areas. They enable industry leading accuracy of up to 750.000d in Zone1/21, Division 1. When tolerances are tight, these scales deliver the precision to ensure consistently accurate results without compromising safety.

The ICS426x is easy to install and operate. It is available in a wide range of capacities, from 3kg to 60kgs.

Different mounting options and a compact design provide you the flexibility to optimize your workflows.

An intuitive user interface ensures quick and secure handling of simple weighing and manual filling operations.

Full Protection, Slim Design

The intrinsically safe product design ensures the highest level of safety and compliance with the latest hazardous-area requirements. In addition, the scales feature a compact design and can be easily maintained.

Easy to use

The scales can be flexibly configured to ensure ergonomic and efficient operation. An intuitive operating philosophy provides easy and secure handling of even complex weighing applications in the hazardous area.

Proven Compliance

The ICS426x scales are approved according global and local standards. Regular audits of the
METTLER TOLEDO production facilities by the certification bodies verify that standards are applied and safety is ensured.

Combi Bench Scale ICS426xd-A3

Be compact in hazardous areas.

Full Protection

The intrinsically safe design ensures a high level of safety in combination with the latest hazardous area requirements for Category 2 / DIV1.

Highest Accuracy

When tolerances are tight, these scales deliver precision of up to 750,000d to ensure accurate results without compromising safety.

User Friendly Design

An intuitive operating system offers easy and secure use for even the most complex weighing applications in hazardous areas.

Specifications

Specifications – Combi Bench Scale ICS426xd-A3

Maximum Capacity	3 kg (6 lb)
Readability	0.005 g (0.00001 lb)
Readability (Certified)	0.1 g (0.0002 lb)
Platform Size (Length)	345 mm (14 in)
Platform Size (Width)	275 mm (11 in)
Platform Size (Height)	135 mm (5.3 in)
Material	Stainless Steel V2A (AISI 304)
Protection Rating	IP66; IP68
Hazardous Approval	ATEX Cat. 2GD; FM Div 1
Hygenic Design	Yes
Interfaces (Optional)	RS422; RS485
Scale Interface	SICSpro
Repeatability(sd)	0.005 g (0.00001 lb)
Repeatability	0.0002 lb
Repeatability	0.007 g
Repeatability (typical)	0.005 g
Repeatability (typical)	0.00001 lb
Application Software	Dynamic Weighing; Counting; Simple weighing; Over Under Checkweighing
Interfaces	Serial
Legal for Trade	NTEP; OIML
Data Interface	Serial
Applications	Simple Weighing; Dynamic weighing; Counting; Over Under Checkweighing
Environment	Wet & Harsh Wet (>/=IP66)
Dimensions/Platform Size	</=400 mm; from 6.3″ to 15.7″
Hazardous Area	Zone 1/21; Division 1
Voltage	230VAC; 120VAC
Display Mounting Flexibility	Desk, Wall, Column, Front
Performance Optimization	For Best Performance: High resolution monobloc load cell
Compliance Support	Hygienic Designed: Easy to Clean; GMP certified: Documented compliance for regulated environments
Maximum Capacity (AM metric)	3 kg
Platform Type	Bench Platforms
Legal for Trade Class OIML	Class II
Legal for Trade Class NTEP	Class II
Readability (Certified) (AM metric)	0.1 g
Zero Return (typical)	0.03 g (0.00007 lb)
Error of Indication at half load (typical)	0.03 g (0.00007 lb)
Hysteresis (typical)	0.02 g (0.00004 lb)
Eccentric Load Deviation at 1/3 of Full Load (typical) (Metric)	0.07 g
Eccentric Load Deviation at 1/3 of Full Load (typical)	0.00015 lb
Error of Indication at full load (typical)	0.05 g (0.00011 lb)
EasyPrint Name	ICS426x-A3
Material Number(s)	22201460

Combi Bench Scale ICS426xd-A6

Be compact in hazardous areas.

Full Protection

The intrinsically safe design ensures a high level of safety in combination with the latest hazardous area requirements for Category 2 / DIV1.

Highest Accuracy

When tolerances are tight, these scales deliver precision of up to 750,000d to ensure accurate results without compromising safety.

User Friendly Design

An intuitive operating system offers easy and secure use for even the most complex weighing applications in hazardous areas.

Specifications

Specifications – Combi Bench Scale ICS426xd-A6

Maximum Capacity	6 kg (12 lb)
Readability	0.01 g (0.00002 lb)
Readability (Certified)	0.2 g (0.0005 lb)
Platform Size (Length)	345 mm (14 in)
Platform Size (Width)	275 mm (11 in)
Platform Size (Height)	135 mm (5.3 in)
Material	Stainless Steel V2A (AISI 304)
Protection Rating	IP66; IP68
Hazardous Approval	ATEX Cat. 2GD; FM Div 1
Hygenic Design	Yes
Interfaces (Optional)	RS422; RS485
Scale Interface	SICSpro
Repeatability(sd)	0.005 g (0.00001 lb)
Repeatability	0.00002 lb
Repeatability	0.01 g
Repeatability (typical)	0.005 g
Repeatability (typical)	0.00001 lb
Application Software	Dynamic Weighing; Counting; Simple weighing; Over Under Checkweighing
Interfaces	Serial
Legal for Trade	NTEP; OIML
Data Interface	Serial
Applications	Simple Weighing; Dynamic weighing; Counting; Over Under Checkweighing
Environment	Wet & Harsh Wet (>/=IP66)
Dimensions/Platform Size	</=400 mm; from 6.3″ to 15.7″
Hazardous Area	Zone 1/21; Division 1
Voltage	230VAC; 120VAC
Display Mounting Flexibility	Desk, Wall, Column, Front
Performance Optimization	For Best Performance: High resolution monobloc load cell
Compliance Support	Hygienic Designed: Easy to Clean; GMP certified: Documented compliance for regulated environments
Maximum Capacity (AM metric)	6 kg
Platform Type	Bench Platforms
Legal for Trade Class OIML	Class II
Legal for Trade Class NTEP	Class II
Readability (Certified) (AM metric)	0.2 g
Zero Return (typical)	0.05 g (0.00011 lb)
Error of Indication at half load (typical)	0.05 g (0.00011 lb)
Hysteresis (typical)	0.03 g (0.00007 lb)
Eccentric Load Deviation at 1/3 of Full Load (typical) (Metric)	0.14 g
Eccentric Load Deviation at 1/3 of Full Load (typical)	0.00031 lb
Error of Indication at full load (typical)	0.1 g (0.00022 lb)
EasyPrint Name	ICS426x-A6
Material Number(s)	22201461

Combi Bench Scale ICS426xd-AB15

Be compact in hazardous areas.

Full Protection

The intrinsically safe design ensures a high level of safety in combination with the latest hazardous area requirements for Category 2 / DIV1.

Highest Accuracy

When tolerances are tight, these scales deliver precision of up to 750,000d to ensure accurate results without compromising safety.

User Friendly Design

An intuitive operating system offers easy and secure use for even the most complex weighing applications in hazardous areas.

Specifications

Specifications – Combi Bench Scale ICS426xd-AB15

Maximum Capacity	15 kg (30 lb)
Readability	0.02 g (0.00005 lb)
Readability (Certified)	0.5 g (0.001 lb)
Platform Size (Length)	350 mm (14 in)
Platform Size (Width)	280 mm (11 in)
Platform Size (Height)	132 mm (5.2 in)
Material	Stainless Steel V2A (AISI 304)
Protection Rating	IP66; IP68
Hazardous Approval	ATEX Cat. 2GD; FM Div 1
Hygenic Design	Yes
Interfaces (Optional)	RS422; RS485
Scale Interface	SICSpro
Repeatability(sd)	0.02 g (0.00004 lb)
Repeatability	0.00005 lb
Repeatability	0.02 g
Repeatability (typical)	0.02 g
Repeatability (typical)	0.00004 lb
Application Software	Dynamic Weighing; Counting; Simple weighing; Over Under Checkweighing
Interfaces	Serial
Legal for Trade	NTEP; OIML
Data Interface	Serial
Applications	Simple Weighing; Dynamic weighing; Counting; Over Under Checkweighing
Environment	Wet & Harsh Wet (>/=IP66)
Dimensions/Platform Size	</=400 mm; from 6.3″ to 15.7″
Hazardous Area	Zone 1/21; Division 1
Voltage	230VAC; 120VAC
Display Mounting Flexibility	Desk, Wall, Column, Front
Performance Optimization	For Best Performance: High resolution monobloc load cell
Compliance Support	Hygienic Designed: Easy to Clean; GMP certified: Documented compliance for regulated environments
Maximum Capacity (AM metric)	15 kg
Platform Type	Bench Platforms
Legal for Trade Class OIML	Class II
Legal for Trade Class NTEP	Class II
Readability (Certified) (AM metric)	0.5 g
Zero Return (typical)	0.2 g (0.00044 lb)
Error of Indication at half load (typical)	0.08 g (0.00018 lb)
Hysteresis (typical)	0.05 g (0.00011 lb)
Eccentric Load Deviation at 1/3 of Full Load (typical) (Metric)	0.35 g
Eccentric Load Deviation at 1/3 of Full Load (typical)	0.00077 lb
Error of Indication at full load (typical)	0.2 g (0.00044 lb)
EasyPrint Name	ICS426x-AB15
Material Number(s)	22201462

Combi Bench Scale ICS426xd-AB30

Be compact in hazardous areas.

Full Protection

The intrinsically safe design ensures a high level of safety in combination with the latest hazardous area requirements for Category 2 / DIV1.

Highest Accuracy

When tolerances are tight, these scales deliver precision of up to 750,000d to ensure accurate results without compromising safety.

User Friendly Design

An intuitive operating system offers easy and secure use for even the most complex weighing applications in hazardous areas.

Specifications

Specifications – Combi Bench Scale ICS426xd-AB30

Maximum Capacity	30 kg (60 lb)
Readability	0.05 g (0.0001 lb)
Readability (Certified)	1 g (0.002 lb)
Platform Size (Length)	350 mm (14 in)
Platform Size (Width)	280 mm (11 in)
Platform Size (Height)	132 mm (5.2 in)
Material	Stainless Steel V2A (AISI 304)
Protection Rating	IP66; IP68
Hazardous Approval	ATEX Cat. 2GD; FM Div 1
Hygenic Design	Yes
Interfaces (Optional)	RS422; RS485
Scale Interface	SICSpro
Repeatability(sd)	0.02 g (0.00004 lb)
Repeatability	0.0001 lb
Repeatability	0.05 g
Repeatability (typical)	0.02 g
Repeatability (typical)	0.00004 lb
Application Software	Dynamic Weighing; Counting; Simple weighing; Over Under Checkweighing
Interfaces	Serial
Legal for Trade	NTEP; OIML
Data Interface	Serial
Applications	Simple Weighing; Dynamic weighing; Counting; Over Under Checkweighing
Environment	Wet & Harsh Wet (>/=IP66)
Dimensions/Platform Size	</=400 mm; from 6.3″ to 15.7″
Hazardous Area	Zone 1/21; Division 1
Voltage	230VAC; 120VAC
Display Mounting Flexibility	Desk, Wall, Column, Front
Performance Optimization	For Best Performance: High resolution monobloc load cell
Compliance Support	Hygienic Designed: Easy to Clean; GMP certified: Documented compliance for regulated environments
Maximum Capacity (AM metric)	30 kg
Platform Type	Bench Platforms
Legal for Trade Class OIML	Class II
Legal for Trade Class NTEP	Class II
Readability (Certified) (AM metric)	1 g
Zero Return (typical)	0.2 g (0.00044 lb)
Error of Indication at half load (typical)	0.2 g (0.00044 lb)
Hysteresis (typical)	0.05 g (0.00011 lb)
Eccentric Load Deviation at 1/3 of Full Load (typical) (Metric)	0.7 g
Eccentric Load Deviation at 1/3 of Full Load (typical)	0.00154 lb
Error of Indication at full load (typical)	0.4 g (0.00088 lb)
EasyPrint Name	ICS426x-AB30
Material Number(s)	22201463

Combi Bench Scale ICS426xd-AB60

Be compact in hazardous areas.

Full Protection

The intrinsically safe design ensures a high level of safety in combination with the latest hazardous area requirements for Category 2 / DIV1.

Highest Accuracy

When tolerances are tight, these scales deliver precision of up to 750,000d to ensure accurate results without compromising safety.

User Friendly Design

An intuitive operating system offers easy and secure use for even the most complex weighing applications in hazardous areas.

Specifications

Specifications – Combi Bench Scale ICS426xd-AB60

Maximum Capacity	60 kg (120 lb)
Readability	0.1 g (0.0002 lb)
Readability (Certified)	2 g (0.005 lb)
Platform Size (Length)	350 mm (14 in)
Platform Size (Width)	280 mm (11 in)
Platform Size (Height)	132 mm (5.2 in)
Material	Stainless Steel V2A (AISI 304)
Protection Rating	IP66; IP68
Hazardous Approval	ATEX Cat. 2GD; FM Div 1
Hygenic Design	Yes
Interfaces (Optional)	RS422; RS485
Scale Interface	SICSpro
Repeatability(sd)	0.1 g (0.00022 lb)
Repeatability	0.0002 lb
Repeatability	0.1 g
Repeatability (typical)	0.1 g
Repeatability (typical)	0.00022 lb
Application Software	Dynamic Weighing; Counting; Simple weighing; Over Under Checkweighing
Interfaces	Serial
Legal for Trade	NTEP; OIML
Data Interface	Serial
Applications	Simple Weighing; Dynamic weighing; Counting; Over Under Checkweighing
Environment	Wet & Harsh Wet (>/=IP66)
Dimensions/Platform Size	</=400 mm; from 6.3″ to 15.7″
Hazardous Area	Zone 1/21; Division 1
Voltage	230VAC; 120VAC
Display Mounting Flexibility	Desk, Wall, Column, Front
Performance Optimization	For Best Performance: High resolution monobloc load cell
Compliance Support	Hygienic Designed: Easy to Clean; GMP certified: Documented compliance for regulated environments
Maximum Capacity (AM metric)	60 kg
Platform Type	Bench Platforms
Legal for Trade Class OIML	Class II
Legal for Trade Class NTEP	Class II
Readability (Certified) (AM metric)	2 g
Zero Return (typical)	0.3 g (0.00066 lb)
Error of Indication at half load (typical)	0.6 g (0.00132 lb)
Hysteresis (typical)	0.2 g (0.00044 lb)
Eccentric Load Deviation at 1/3 of Full Load (typical) (Metric)	2.1 g
Eccentric Load Deviation at 1/3 of Full Load (typical)	0.00462 lb
Error of Indication at full load (typical)	0.8 g (0.00176 lb)
EasyPrint Name	ICS426x-AB60
Material Number(s)	22201464

37604494 / 33389620

info@el-batawi.com

6 El Sad El Aly Street – Dokki